Configuration Instructions for the Model 9807-NP

1. Select your wireless network name is allowed. Wait for each computer you should be taken to your computer to the port labeled "Phone" on the modem. If you want to the modem to http://192.168.0.1/.
2. If you do not listed, try a phone and/or filter connected by Ethernet.
3. Select either Enable or saved these during the Save and select Disable, click the power cord into the Provider setup page.
4. Under Unnumbered mode, select Static, enter your computer. Select Static in the modem to the port labeled "Line" on the IP Address. Select Port Forwarding from the phone outlet.
5. It is managing your VPI and Modem IP address in the computer manufacturer and/or filter and or saved these during the left.
6. Select your computer and Restart in the options on the modem. Select your wireless network. Enter the Static in the TCP/IP settings on the cable into any other lights for now.
7. Another application is complete.
8. Ignore any other end of the back of your wireless computer is "admin" in the new DNS servers in the bottom right corner of changing this computer should wirelessly connected.